PS3 Bluetooth connectivity

[Bowzer Mike]

@davidwrightini I got it pre-loaded so I have no idea,

[Bowzer Mike]

@davidwrightini Would I need to do this
https://github.com/recalbox/recalbox-os/wiki/Connect-bluetooth-controller-with-hcitool-and-hidd-manually-(EN)

[Anonpebbles]

Perhaps, but first connect to your pi via your browser (type in it's ip, 192.168.1.***) and go to the config page
scroll down to PS3 controller and make sure it's enabled with the correct driver. Also make sure xbox pads are disabled. Then try doing the manual connect via putty

[Bowzer Mike]

@davidwrightini here is what it has

# -------------- D - Controllers ----------------- #
# Enable support for standard bluetooth controllers
controllers.bluetooth.enabled=1


## Please enable only one of these
# -------------- D1 - PS3 Controllers ------------ #
##Enable PS3 controllers support
controllers.ps3.enabled=1
## Choose an driver between official, shanwan and gasia if you have dualshock clones (official,shanwan,gasia)
controllers.ps3.driver=official


# ------------ D2 - XBOX Controllers ------------ #
## Xbox controllers are already supported, but xboxdrv can solve some compatibility issues 
## Enable xboxdrv driver, disable this if you enabled ps3 controllers (0,1)
controllers.xboxdrv.enabled=0
## Set the amount of controllers to use with xboxdrv (0..4)
controllers.xboxdrv.nbcontrols=2


# ------------ D3 - GPIO Controllers ------------ #
## GPIO Controllers
## enable controllers on GPIO with mk_arcarde_joystick_rpi (0,1)
controllers.gpio.enabled=0
## mk_gpio arguments, map=1 for one controller, map=1,2 for 2 (map=1,map=1,2)
controllers.gpio.args=map=1,2


## DB9 Controllers
## Enable DB9 drivers for atari, megadrive, amiga controllers (0,1)
controllers.db9.enabled=0
## db9 arguments
controllers.db9.args=map=1

## Gamecon controllers
## Enable gamecon controllers, for nes, snes psx (0,1) 
controllers.gamecon.enabled=0
## gamecon_args
controllers.gamecon.args=map=1

## XGaming's XArcade Tankstik and other compatible devices
controllers.xarcade.enabled=1

[Anonpebbles]

Looks fine. You might want to check that your bluetooth dongle is compatible using the compatibility list.

[Bowzer Mike]

@davidwrightini I did and it is. Its not a huge deal just kinda sucks I have to plug em in everytime I boot up my system. Thanks for taking a look and tryin to help! Greatly appreciated =D

[linuxxx82]

interesting topic,
i found out that the "plug and play" bluetooth dongle works well, when ever i do a reboot of my Pi, I just have to pair it ( pressing the hotkey button)..
what google cant provide me tho is that i now have to link a second wireless Ps3 controller.
what do i do?. do i unplug my first controller blue tooth first,
is it best to rather get a wired controller??

HELP

thanks

[Bowzer Mike]

@linuxxx82 I just plugged my second one in once the Bluetooth picked up the first controller and it seems once one is picked up the other one it good to go. but yeah try just plugging it in after you get one recognized

[Bowzer Mike]

@linuxxx82 So far the easiest remote to set up has been the xbox360 remotes with the wireless PC dongle

[Anonpebbles]

@Bowzer-Mike No worries sorry I couldn't be of any help! I too have had trouble getting ps3 controllers to work over Bluetooth ;_;