Problème power script

[lainbebop]

@supernature2k bon je vais faire la dernière MAJ et si ça ne marche pas je vais reinstaller

C’est peut être du au fait que j’ai installé le script du wiki ? J’ai envoyé la ligne « uninstall » pourtant, mais ça a peut-être modifié des fichiers

[supernature2k]

@lainbebop c'est possible oui

prends bien le PIN356PUSHRESET et cable bien le + sur le pin 5 (GPIO3) et le - sur le pin 6 (GND)

[lainbebop]

@supernature2k alors en gros j’ai un cable qui va du pin3 au bouton sanwa et un cable qui va du pin6 au bouton sanwa. Je ne savais pas qu’il y avait une polarité ?

Pour la ligne dans recalbox.conf c’est bien celle ci !

[supernature2k]

@lainbebop non y a pas vraiment de polarité si c'est un bouton simple. Par contre PIN 3?!?

PIN 3 c'est pour RESET

[lainbebop]

@supernature2k

Pardon pin5 et pin6 selon ce schéma!!

C’est un bouton comme ça

[Tactys]

j'ai exactement le même problème lainbebop. J'ai brancher sur 5 et 6 avec un bouton poussoir, configurer PIN356PUSHRESET mais quand je suis dans un émulateur ça fait un hard reset. Bizarrement cela fonctionne bien que sur nintendo 64 mais pour les autres consoles cela fait un hard reset.

[lainbebop]

@supernature2k @Tactys
J'ai fait la dernière MAJ,

• Appui long : rien
• Appui court : rien
• 2 appuis courts : Pi éteint (hard :/)

Tu as aussi tenté d'installer le script sur cette page @Tactys ?

[Tactys]

@lainbebop J'ai fait la dernière Maj aussi mais j'ai pas installer le script.

[supernature2k]

@lainbebop Hi,
J'ai refait un test hier sur une recalbox fraîchement mise à jour et j'ai bien le comportement attendu sur les deux boutons.

Peux tu re-verifier ton recalbox.conf et ton cablage?

[lainbebop]

@supernature2k

(on doit tagger et mettre le text dans 2 posts séparés sinon "flagged as spam )

[lainbebop]

This post is deleted!

[lainbebop]

Voici le recalbox.conf ! A noter qu'avant la MAJ ne n'avais pas le PIN356PUSHRESET que je l'ai ajouté, et qu'après la MAJ j'avais 10fois cette ligne et plus les autres (qui étaient commentés ";"!) j'ai donc tout supprimé pour ne laisser que celui là :

# System Variable
# You can configure your recalbox from here
# To set a variable, remove the first ; on the line



# ------------ A - System Options ----------- #
#    Uncomment the system.power.switch you use
system.power.switch=PIN356PUSHRESET


## fbcp FrameBuffer Copy Program
## For small TFT screen on GPIO and SPI
## See https://github.com/recalbox/recalbox-os/wiki/Utility---Use-of-fbcp-for-small-TFT-screen-%28EN%29 for details
## Needed for Waveshare 3.2" 3.5" TFT screen, 2.8" Adafruit screen
## See https://github.com/recalbox/recalbox-os/wiki/TFT-Screen-SPI-Bus-%28EN%29
## for support and configuration details needed by /boot/config.txt
system.fbcp.enabled=0

## Recalbox Manager (http manager)
system.manager.enabled=1
## 1 or 2, depending on the manager version you wish
system.manager.version=2

## Recalbox security
# enforce security
#   samba password required
#   disable virtual gamepads
system.security.enabled=0

## Recalbox API (REST)
system.api.enabled=0

## Allow a specific resolution for ES only from the command : tvservice -m [MODE]
## Leave commented for the default usual behaviour
;system.es.videomode=CEA 4 HDMI

## EmulationStation
### menu style
### default -> default all options menu
### none -> no menu except the game search menu
### bartop -> less menu, only needed for bartops
emulationstation.menu=default
### Select a system to show on boot (use rom directory name) (string)
emulationstation.selectedsystem=favorites
### Show the gamelist of the first or selected system on boot (0,1)
emulationstation.bootongamelist=0
### Disable system view ES will boot and show ONLY the first or selected system (0,1)
emulationstation.hidesystemview=0
### Pa**e Gamelists only. Show only games listed in gamelist.xml files (0,1)
emulationstation.gamelistonly=0
### Force basicgameList view to be displayed, even if your game systems are scraped (0,1)
emulationstation.forcebasicgamelistview=0

## Emulator special keys
## default -> default all special keys
## nomenu -> cannot popup the emulator menu
## none -> no special keys in emulators
system.emulators.specialkeys=default

## Show or hide kodi in emulationstation (0,1)
kodi.enabled=1
## Start kodi at launch (0,1)
kodi.atstartup=0
## set x button shortcut (0,1)
kodi.xbutton=0

## Allow a specific resolution for Kodi only from the command : tvservice -m [MODE]
## By default is using the default resolution of your screen
kodi.videomode=default

## Kodi can wait for a network component before starting
## waithost is the ip or hostname that must answer to a ping to validate the availability
## waittime is the maximum time waited when kodi boots
## if waitmode is required, kodi will not start if the component is not available
## if waitmode is wish, kodi will start if the component is not available
## if waitmode is not set or has another value, kodi will start immediately
;kodi.network.waitmode=required
;kodi.network.waittime=10
;kodi.network.waithost=192.168.0.50

## Hyperion
## Hyperion allows you to use an ambilight like led system on your recalbox
## Use hypercon to create your configuration file, and copy it in /recalbox/share/system/configs/hyperion/hyperion.config.json
hyperion.enabled=0


# ------------ B - Network ------------ #
## Set system hostname
system.hostname=RECALBOX
## Activate wifi (0,1)
wifi.enabled=1
## Wifi SSID (string)
wifi.ssid=Livebox-CF56
## Wifi KEY (string)
## after rebooting the recalbox, the "new key" is replace by a hidden value "enc:xxxxx"
## you can edit the "enc:xxxxx" value to replace by a clear value, it will be updated again at the following reboot
## Escape your special chars (# ; $) with a backslash : $ => \$
wifi.key=enc:U2FsdGVkX19bTpsXwvHmV1S+UUKJMMot/DmZYLtq8TNmN0c3xQdMHgSLwcUFCnxi

# secondary wifi (not configurable via the user interface)
;wifi2.ssid=new ssid
;wifi2.key=new key

# third wifi (not configurable via the user interface)
;wifi3.ssid=new ssid
;wifi3.key=new key

## Samba share
system.samba.enabled=1
### Virtual Gamepads
system.virtual-gamepads.enabled=1
### SSH
system.ssh.enabled=1

# ------------ C - Audio ------------ #
## Set the audio device (auto, hdmi, jack)
audio.device=jack
## Set system volume (0..100)
audio.volume=77
## Enable or disable system sounds in ES (0,1)
audio.bgmusic=1



# -------------- D - Controllers ----------------- #
# Enable support for standard bluetooth controllers
controllers.bluetooth.enabled=1


## Please enable only one of these
# -------------- D1 - PS3 Controllers ------------ #
##Enable PS3 controllers support
controllers.ps3.enabled=1
## Choose a driver between bluez, official and shanwan
## bluez -> bluez 5 + kernel drivers, support official and shanwan sisaxis
## official -> sixad drivers, support official and gasia sisaxis
## shanwan -> shanwan drivers, support official and shanwan sisaxis
controllers.ps3.driver=bluez


# ------------ D2 - GPIO Controllers ------------ #
## GPIO Controllers
## enable controllers on GPIO with mk_arcarde_joystick_rpi (0,1)
controllers.gpio.enabled=0
## mk_gpio arguments, map=1 for one controller, map=1,2 for 2 (map=1,map=1,2)
controllers.gpio.args=map=1,2


# ------------ D3 - Steam Controllers ------------ #
## Enable steam controller service
controllers.steam.enabled=0


## DB9 Controllers
## Enable DB9 drivers for atari, megadrive, amiga controllers (0,1)
controllers.db9.enabled=0
## db9 arguments
controllers.db9.args=map=1

## Gamecon controllers
## Enable gamecon controllers, for nes, snes psx (0,1) 
controllers.gamecon.enabled=0
## gamecon_args
controllers.gamecon.args=map=1

## XGaming's XArcade Tankstik and other compatible devices
controllers.xarcade.enabled=1



# ------------ F - Language and keyboard ------------ #
## Set the language of the system (fr_FR,en_US,en_GB,de_DE,pt_BR,es_ES,it_IT,eu_ES,tr_TR,zh_CN)
system.language=fr_FR
## set the keyboard layout (fr,en,de,us,es)
system.kblayout=fr
## Set you local time
## Select your timezone from : ls /usr/share/zoneinfo/ (string)
system.timezone=Europe/Paris



# ------------ G - UPDATES ------------ #
## Automatically check for updates at start (0,1)
updates.enabled=1
# Update type : default to stable
updates.type=stable


# ------------ H - HERE IT IS - GLOBAL EMULATOR CONFIGURATION ------------ #
## The global value will be used for all emulators, except if the value
## is redefined in the emulator

## Set game resolution for emulators
## select your mode from the command : tvservice -m [MODE]
## CEA 5 HDMI : 1920x1080 @ 60Hz 16:9, clock:74MHz interlaced 
## CEA 4 HDMI : 1280x720 @ 60Hz 16:9, clock:74MHz progressive
## use 'default' for using the default resolution
## use 'auto' : switches to CEA 4 HDMI if supported, else keep the current resolution
## (string)
global.videomode=DMT 9 HDMI

## Shader set 
## Automatically select shaders for all systems
## (none, retro, scanlines)
global.shaderset=none

## Once enabled, your screen will be cropped, and you will have a pixel perfect image (0,1)
global.integerscale=0

## Set gpslp shader for all emulators (prefer shadersets above). Absolute path (string)
global.shaders=

## Set ratio for all emulators (auto,4/3,16/9,16/10,custom)
global.ratio=auto

## Set smooth for all emulators (0,1)
global.smooth=1

## Set rewind for all emulators (0,1)
global.rewind=0

## Set autosave/load savestate for all emulators (0,1)
global.autosave=0

## Enable retroarchievements (0,1)
## Set your www.retroachievements.org username/password
## Escape your special chars (# ; $) with a backslash : $ => \$
global.retroachievements=0
global.retroachievements.hardcore=0
global.retroachievements.username=
global.retroachievements.password=

## Set retroarch input driver (auto, udev, sdl2)
## If you don't have issues with your controllers, let auto
global.inputdriver=auto

## If you do not want recalboxOS to generate the configuration for all emulators (string)
;global.configfile=/path/to/my/configfile.cfg

# ------------ I - EMULATORS CHOICES ----------- #
## You can override the global configuration here
## Here is the snes example
;snes.videomode=CEA 4 HDMI
snes.core=snes9x_next
;snes.shaders=/recalbox/share/shaders/shaders_glsl/mysnesshader.gplsp
snes.ratio=4/3
;snes.smooth=0
;snes.rewind=1
;snes.autosave=0
;snes.emulator=libretro
;snes.integerscale=0
## If you do not want recalboxOS to generate the configuration for the emulator : 
;snes.configfile=/path/to/my/configfile.cfg

## Default cores for RPi3
snes.core=snes9x_next
gba.core=mgba
mame.core=mame078
nes.core=quicknes

## NeoGeo emulator 
## You can use pifba or a libretro core (fba2x,libretro)
neogeo.emulator=libretro
## If you set libretro as neogeo.emulator, the line below sets the retroarch core (fba,imame4all)
neogeo.core=fba

## N64 emulator is configured to display a screen with a 640x480 resolution (native n64 resolution)
## So you must use one of these video modes (DMT 4 HDMI,CEA 1 HDMI).
## If your screen is not compatible with one of these video modes, please check the recalbox's wiki.
n64.videomode=DMT 4 HDMI
## If you are using a CRT screen, please change the setting above with this one : 
# n64.videomode=default

## Dreamcast emulator
## Like N64, such a CPU intensive emulator needs a small resolution
## Consider DMT 4 HDMI (640*480) or DMT 9 HDMI (800*600). If you have a black screen on dreamcast, try DMT 9 HDMI here
dreamcast.videomode=DMT 4 HDMI

## Configurations generated by Recalbox
system.es.menu=default
controllers.xboxdrv.enabled=0
controllers.xboxdrv.nbcontrols=2
fba.ratio=4/3
mame.ratio=4/3
nes.ratio=auto
nes.emulator=libretro
psx.ratio=4/3
psx.rewind=0
fba.rewind=0

Pour les branchements, j'ai juste 2 fils qui partent du bouton, directements branchés sur le GPIO :

Merci de ton aide !

[supernature2k]

@lainbebop la conf et les branchements sont bons

Peux-tu vérifier que le fichier existe bien?

Tu dois avoir un fichier rpi-pin356-power.py sous /recalbox/scripts/

[lainbebop]

@supernature2k

Je pense que oui ?

[supernature2k]

@lainbebop désolé mais là je suis à court d'idées

un petit ps pour voir si le script tourne bien en arrière plan?

[lainbebop]

Voilà ce que j'obtiens avec le ps :

PID   USER     COMMAND
    1 root     init [3]
    2 root     [kthreadd]
    3 root     [ksoftirqd/0]
    4 root     [kworker/0:0]
    5 root     [kworker/0:0H]
    6 root     [kworker/u8:0]
    7 root     [rcu_sched]
    8 root     [rcu_bh]
    9 root     [migration/0]
   10 root     [migration/1]
   11 root     [ksoftirqd/1]
   12 root     [kworker/1:0]
   13 root     [kworker/1:0H]
   14 root     [migration/2]
   15 root     [ksoftirqd/2]
   16 root     [kworker/2:0]
   17 root     [kworker/2:0H]
   18 root     [migration/3]
   19 root     [ksoftirqd/3]
   20 root     [kworker/3:0]
   21 root     [kworker/3:0H]
   22 root     [kdevtmpfs]
   23 root     [netns]
   24 root     [perf]
   25 root     [khungtaskd]
   26 root     [writeback]
   27 root     [crypto]
   28 root     [bioset]
   29 root     [kblockd]
   30 root     [kworker/0:1]
   31 root     [rpciod]
   32 root     [kswapd0]
   33 root     [vmstat]
   34 root     [fsnotify_mark]
   35 root     [nfsiod]
   44 root     [kthrotld]
   45 root     [bioset]
   46 root     [bioset]
   47 root     [bioset]
   48 root     [bioset]
   49 root     [bioset]
   50 root     [bioset]
   51 root     [bioset]
   52 root     [bioset]
   53 root     [bioset]
   54 root     [bioset]
   55 root     [bioset]
   56 root     [bioset]
   57 root     [bioset]
   58 root     [bioset]
   59 root     [bioset]
   60 root     [bioset]
   61 root     [bioset]
   62 root     [bioset]
   63 root     [bioset]
   64 root     [bioset]
   65 root     [bioset]
   66 root     [bioset]
   67 root     [bioset]
   68 root     [bioset]
   69 root     [VCHIQ-0]
   70 root     [VCHIQr-0]
   71 root     [VCHIQs-0]
   72 root     [iscsi_eh]
   73 root     [dwc_otg]
   74 root     [kworker/1:1]
   75 root     [DWC Notificatio]
   76 root     [kworker/u8:1]
   77 root     [irq/92-mmc1]
   78 root     [VCHIQka-0]
   79 root     [SMIO]
   80 root     [deferwq]
   81 root     [kworker/u8:2]
   82 root     [bioset]
   83 root     [mmcqd/0]
   84 root     [kworker/2:1]
   85 root     [jbd2/mmcblk0p2-]
   86 root     [ext4-rsv-conver]
   87 root     [kworker/2:1H]
   88 root     [kworker/1:2]
   91 root     [kworker/0:1H]
   92 root     [kworker/3:1]
  114 root     /sbin/syslogd -n
  117 root     /sbin/klogd -n
  155 root     dbus-daemon --fork --print-address 5 --print-pid 6 --session
  162 root     [kworker/3:1H]
  165 root     [kworker/1:1H]
  166 root     [kworker/0:2]
  167 root     /sbin/udevd -d
  204 root     [cfg80211]
  206 root     [brcmf_wq/mmc1:0]
  207 root     [brcmf_wdog/mmc1]
  210 root     [kworker/3:2]
  242 dbus     dbus-daemon --system
  255 root     /usr/sbin/connmand -n
  310 root     [ipv6_addrconf]
  317 root     /usr/sbin/wpa_supplicant -u
  319 root     [kworker/3:3]
  411 root     [jbd2/mmcblk0p3-]
  412 root     [ext4-rsv-conver]
  531 root     /usr/sbin/lircd -n --driver=default --device=/dev/lirc0 --output
  921 root     {emulationstatio} /usr/bin emulationstation
 1009 root     /usr/libexec/bluetooth/bluetoothd --noplugin=sixaxispair
 1093 root     /usr/sbin/ntpd -g
 1099 avahi    avahi-daemon: running [RECALBOX.local]
 1109 root     /usr/sbin/dropbear -R
 1122 root     smbd -D --configfile=/etc/samba/smb.conf
 1124 root     {smbd-notifyd} smbd -D --configfile=/etc/samba/smb.conf
 1125 root     {cleanupd} smbd -D --configfile=/etc/samba/smb.conf
 1140 root     nmbd -D --configfile=/etc/samba/smb.conf
 1154 root     {powerswitch.sh} /bin/bash /recalbox/scripts/powerswitch.sh star
 1164 root     python /recalbox/scripts/rpi-pin356-power.py -m push
 1170 root     node virtualgamepads.js
 1189 root     {S94manager} /bin/sh /etc/init.d/S94manager start
 1191 root     node dist/server.js
 1207 root     /sbin/getty 38400 tty2
 1209 root     [kworker/u9:0]
 1210 root     [hci0]
 1211 root     [hci0]
 1213 root     [kworker/u9:1]
 1214 root     /usr/bin/hciattach /dev/serial1 bcm43xx 921600 noflow -
 1215 root     [kworker/u9:2]
 1216 root     /usr/bin/node server.js
 1320 root     /usr/sbin/dropbear -R
 1357 root     -sh
 1369 root     ps

TEST 1

J'ai réinstallé RECALBOX sur une autre SD, sans support externe (j'ai débranché ma clé usb), pour tester.
Donc install propre, sans jeux si ce n'est ceux déjà présents dans RECALBOX.

Et bien c'est pareil !

• Appui court : rien
• Appui long : rien ou coupure du courant
• Appuis répétés : coupure du courant

TEST 2

J'ai débranché mon bouton du GPIO et j'ai mis un couteau (en métal) entre les 2 PIN 5 et 6 : même comportement qu'avec le bouton, coupure du courant du Pi

T_T

[lainbebop]

( @supernature2k )

[supernature2k]

@lainbebop

try this please:

import RPi.GPIO as GPIO
import time
import os
import thread
import datetime
import socket
import sys
import argpa**e
from datetime import datetime
from configgen import recalboxFiles
# this last one retrieves emulators bin names

pa**er = argpa**e.ArgumentPa**er(description='power manager')
pa**er.add_argument("-m", help="mode onoff or push", type=str, required=True)
args = pa**er.pa**e_args()

mode = args.m

IPADDR = "127.0.0.1"
PORTNUM = 55355
# IP and port for retroarch network commands

POWERPLUS = 3
RESETPLUS = 2
LED = 14

GPIO.setwarnings(False)		# no warnings
GPIO.setmode(GPIO.BCM)		# set up BCM GPIO numbering 
 
GPIO.setup(RESETPLUS, GPIO.IN, pull_up_down=GPIO.PUD_UP)
# GPIO on pin 3 is the GPIO 2 in BCM mode
#to Reset+

GPIO.setup(POWERPLUS, GPIO.IN, pull_up_down=GPIO.PUD_UP)
# GPIO on pin 5 is the GPIO 3 in BCM mode
#to Power+

GPIO.setup(LED, GPIO.OUT)
GPIO.output(LED, True)
# GPIO on pin 8 is the GPIO 14 in BCM mode
#to LED+

  
# Define a threaded callback function to run in another thread when events are detected  
def button_pressed(channel):
	if channel == POWERPLUS:
		speed=0.15
		shutdownstring="shutdown -h now"
		nwcommand="QUIT"
		
	elif channel == RESETPLUS:
		speed=0.05
		shutdownstring="shutdown -r now"
		nwcommand="RESET"
		
	timer = 0
	flag = True
	while flag:
		if GPIO.input(channel) == False:
			timer += 1
			print "Button pressed"
		elif GPIO.input(channel) == True:
		
			print "Button released"
			print timer
		
			#timer adds 1 each 0.1 seconds if timer = 10, button is pressed for 1s
			if (timer > 10):
				offreset(speed, shutdownstring)
				print "shutdown"
			elif (timer >=1):
				print "retroarch"
				killthats**t(channel)
				
			timer = 0
			flag = False
		time.sleep(0.1)
		
	
#	on power short press, trying to kill all listed emus 
def killthats**t(channel):
	if channel == POWERPLUS:
		for bin in recalboxFiles.recalboxBins:
				print bin
				proc = os.path.basename(bin)
				print proc
				os.system("killall -9 "+proc)

# 	on long button press clean stop	of ES then shutdown -h or -r		
def offreset(speed, shutdownstring):
	thread.start_new_thread( blink, (speed, ))
	flag=True
	pids = [pid for pid in os.listdir('/proc') if pid.isdigit()]
	os.system("/etc/init.d/S31emulationstation stop")
	while flag:
		flag = False
		for pid in pids:
				try:
					print pid
					commandpath = open(os.path.join('/proc', pid, 'cmdline'), 'rb').read()
					if "emulationstation" in commandpath:
						flag = True
				except IOError:
					continue
	os.system(shutdownstring)

# threaded blinking function for LED	
def blink(speed):
	while True:  
			GPIO.output(LED, False)
			time.sleep(speed)
			GPIO.output(LED, True)
			time.sleep(speed)


# 	sending network command to retroarch (only exit and reset atm)		
def retroarch(nwcommand):
	try:
		s = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
	except socket.error:
		print 'Failed to create socket'
		sys.exit()
	s.sendto(nwcommand, (IPADDR, PORTNUM))
		

GPIO.add_event_detect(RESETPLUS, GPIO.BOTH, callback=button_pressed, bouncetime=2)
GPIO.add_event_detect(POWERPLUS, GPIO.BOTH, callback=button_pressed, bouncetime=2)
while True:
	time.sleep(0.2)

[lainbebop]

@supernature2k

J'ai remplacé le contenu du fichier rpi-pin356-power.py par ton code :

Pression longue :

Sous ES : écran noir et petit logo en bas puis extinction : ça marche ?
Sous Emulateur : délai de 2sec puis coupure (sans écran noir?) : c'est normal ?

Pression courte :

sous ES : Pas de réaction (normal ?)
sous émulateur : pas de réaction (pas normal ?)

[lainbebop]

This post is deleted!