Not appear the Manufacturer from bluetooth dongle, so i think that i need install a driver to be recognized.
When i tryied to start USB Bluetooth with comand hciconfig hci1 up, says that operation is not permited.
And when i connect the dongle, the controller not pair with it.
Do you know How configure and start Bluetooth?
Thanks
Hi @paradadf ,
It's because of the delay comands.
Let's me explain:
When i press a Button, i have noted a delay to game response. It's not ocorred when i connected the controller at USB cable.
i pair the controller connecting the cable USB, then i wait for 10 seconds and remove the cable. Few seconds after, the controler is paired. This don't connected when i plug bluetooth dongle, Just with internal Bt.
sorry my english.
Hi,
I have raspberry 3 pi b+ and recalbox 6.0 installed, but my bluetooth dongle not recognize. I want to pair my ps3 controllers at dongle because of the big delay.
My dongle is a Chipset: CSR8510 and 4.0 version.
Here, some comands and results at terminal:
hciconfig -a
hci1: Type: Primary Bus: UART
BD Address: B8:27:EB:7A:20:DB ACL MTU: 1021:8 SCO MTU: 64:1
UP RUNNING
RX bytes:1018 acl:0 sco:0 events:48 errors:0
TX bytes:2248 acl:0 sco:0 commands:48 errors:0
Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH SNIFF
Link mode: SLAVE ACCEPT
Name: 'BlueZ 5.47'
Class: 0x000000
Service Classes: Unspecified
Device Class: Miscellaneous,
HCI Version: 4.1 (0x7) Revision: 0xb6
LMP Version: 4.1 (0x7) Subversion: 0x2209
Manufacturer: Broadcom Corporation (15)
hci0: Type: Primary Bus: USB
BD Address: 00:1A:7D:DA:71:11 ACL MTU: 679:9 SCO MTU: 48:16
DOWN
RX bytes:1722 acl:0 sco:0 events:90 errors:0
TX bytes:1104 acl:0 sco:0 commands:90 errors:0
Features: 0xff 0xff 0xcd 0xfa 0xdb 0xbf 0x7b 0x87
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Can't init device hci0: Operation not supported (95)
[ 4.634606] Bluetooth: Core ver 2.22
[ 4.634773] Bluetooth: HCI device and connection manager initialized
[ 4.634798] Bluetooth: HCI socket layer initialized
[ 4.634812] Bluetooth: L2CAP socket layer initialized
[ 4.634849] Bluetooth: SCO socket layer initialized
[ 11.869152] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 11.869164] Bluetooth: BNEP filters: protocol multicast
[ 11.869183] Bluetooth: BNEP socket layer initialized
[ 16.332505] Bluetooth: HCI UART driver ver 2.3
[ 16.332519] Bluetooth: HCI UART protocol H4 registered
[ 16.332525] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 16.333372] Bluetooth: HCI UART protocol Broadcom registered
Can somebody help me ? Thanks