@zing Alright will do and i totally understand, appreciate the help so far.

@zing Alright will do and i totally understand, appreciate the help so far.

Ok so after some more testing i think ive found the issue i just dont know how it became a issue or how to fix. So i put the pi OS image back in and looked at the /dev files in there and it has the 12c file and 12c-1 file there but in the recalbox image it only has 12c-11 and 12c-12? I was like ok i can just copy the file over from the Pi OS but in short thats impossible so idk how to enable the recalbox to create the same file as the Pi OS as thats what is needed it seems for me to make it work but like i posted above, u can see the steps i did and its not a hard to follow guide so not sure what the issue is unless someone needs to look at my config file and cmd file to confirm its correct?

@zing Alright so some of the instructions in link was different from the script page but im assumingits because the script was reffering to a Pi3 so i followed the offical ones and was hopeful when i saw the lines to add was different from the script line as i assumed that was the issue right there but still wont work as when i get to this step "on newer Raspberry models (pi4, pi3, pi2): i2cdetect -y 1" that command just never works, it worked when i tested the screen using a OS version of Pi to boot into the OS and all but on recall box that command just never works as i get this messsage "# i2cdetect -y 1
Error: Could not open file /dev/i2c-1' or /dev/i2c/1': No such file or directory" So is the correct spot for "#Activate I2C
dtparam=i2c1=on
dtparam=i2c_arm=on" to be put at the very bottom under where it says

custom config

[all]
#Activate I2C
dtparam=i2c1=on
dtparam=i2c_arm=on

Is that how it is suppose to look or does that go some where else? Thats only other thing i can think of cause like i said screen for sure works as i even went back to pi OS to test and all was good.

This is screen im using by the way > https://www.amazon.com/Display-Module-SSD1306-Du-pont-Arduino/dp/B07VDXYDVY/ref=pd_ybh_a_sccl_2/132-6102609-0630155?pd_rd_w=p14Ay&content-id=amzn1.sym.8e5a2e6a-2480-42b2-b29b-9d31f472f1fb&pf_rd_p=8e5a2e6a-2480-42b2-b29b-9d31f472f1fb&pf_rd_r=4CGDYG59SCCK9XGNWH1D&pd_rd_wg=YigcG&pd_rd_r=aa1d7db1-a0f5-4a45-b43f-bc75ee35ccc7&pd_rd_i=B07VDXYDVY&psc=1

@zing i appreciate the link, i just got back into town so once i get unpacked and settled ill have a look. Hoping there is someone who has done this as there is legit no video of any kind on how to enable this feature and love the idea behind it and case i bought is specifically for this so hope to get it working.

Hey guys, i found this topic

https://forum.recalbox.com/topic/8689/script-clcd-display-on-recalbox

And ive been trying since yesterday to get this thing working on a pi4 as i got it working on Pi OS but wanted it for recalbox but idk if its just outdated as it was last mentioned for a pi3 or what but does anyone or can anyone give a updated tutorial on this by chance as there is legit nothing on google about this except for when on pi.

I tried this instructions from this topic but get errors during script install and manual dont work and says im missing Dev i2c-1 stuff but ive followed instructions to the letter and just nothing.

Would appreciate any help, thank you.