can I use more than 1 wireless controller? I can pair only one

I use recalbox 4.1 now and im using

I use other USB cable and when I connect to the RP the joystick begins to vibrate.

When I use dmesg with the new cable its says SHANWAN.

@paradadf

dmesg

[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.1.19-v7 (root@c4bc7cb1932e) (gcc version 4.9.3 (Buildroot 2016.02-git-dirty) ) #1 SMP Mon Feb 20 15:51:48 UTC 2017
[ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2
[ 0.000000] cma: Reserved 8 MiB at 0x1e400000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat 80880fc0, node_mem_map 9dfa4000
[ 0.000000] Normal zone: 1116 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] [bcm2709_smp_init_cpus] enter (9420->f3003010)
[ 0.000000] [bcm2709_smp_init_cpus] ncores=4
[ 0.000000] PERCPU: Embedded 12 pages/cpu @9efb1000 s20416 r8192 d20544 u49152
[ 0.000000] pcpu-alloc: s20416 r8192 d20544 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125860
[ 0.000000] Kernel command line: 8250.nr_uarts=0 dma.dmachans=0x7f35 bcm2708_fb.fbwidth=640 bcm2708_fb.fbheight=480 bcm2709.boardrev=0xa22082 bcm2709.serial=0x6e382c05 smsc95xx.macaddr=B8:27:EB:38:2C:05 bcm2708_fb.fbswap=1 bcm2709.uart_clock=48000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 dwc_otg.fiq_fix_enable=1 sdhci-bcm2708.sync_after_dma=0 dwc_otg.lpm_enable=0 console=tty3 loglevel=3 elevator=deadline vt.global_cursor_default=0 logo.nologo root=/dev/mmcblk0p7 rootwait fastboot noswap ro
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 485052K/507904K available (6064K kernel code, 534K rwdata, 1664K rodata, 444K init, 757K bss, 14660K reserved, 8192K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0x9f800000 - 0xff000000 (1528 MB)
[ 0.000000] lowmem : 0x80000000 - 0x9f000000 ( 496 MB)
[ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
[ 0.000000] .text : 0x80008000 - 0x807945dc (7730 kB)
[ 0.000000] .init : 0x80795000 - 0x80804000 ( 444 kB)
[ 0.000000] .data : 0x80804000 - 0x80889b10 ( 535 kB)
[ 0.000000] .bss : 0x8088c000 - 0x809497dc ( 758 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Additional per-CPU info printed with stalls.
[ 0.000000] NR_IRQS:608
[ 0.000000] Architected cp15 timer(s) running at 19.20MHz (phys).
[ 0.000000] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000008] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000025] Switching to timer-based delay loop, resolution 52ns
[ 0.000240] Console: colour dummy device 80x30
[ 0.000435] console [tty3] enabled
[ 0.000464] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.000484] pid_max: default: 32768 minimum: 301
[ 0.000783] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000797] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.001748] Initializing cgroup subsys blkio
[ 0.001773] Initializing cgroup subsys memory
[ 0.001796] Initializing cgroup subsys devices
[ 0.001816] Initializing cgroup subsys freezer
[ 0.001841] Initializing cgroup subsys net_cls
[ 0.001890] CPU: Testing write buffer coherency: ok
[ 0.001950] ftrace: allocating 20313 entries in 60 pages
[ 0.048368] CPU0: update cpu_capacity 1024
[ 0.048400] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.048412] [bcm2709_smp_prepare_cpus] enter
[ 0.048544] Setting up static identity map for 0x8240 - 0x8274
[ 0.050288] [bcm2709_boot_secondary] cpu:1 started (0) 17
[ 0.050477] [bcm2709_secondary_init] enter cpu:1
[ 0.050519] CPU1: update cpu_capacity 1024
[ 0.050526] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.050912] [bcm2709_boot_secondary] cpu:2 started (0) 17
[ 0.051076] [bcm2709_secondary_init] enter cpu:2
[ 0.051098] CPU2: update cpu_capacity 1024
[ 0.051104] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.051466] [bcm2709_boot_secondary] cpu:3 started (0) 17
[ 0.051597] [bcm2709_secondary_init] enter cpu:3
[ 0.051618] CPU3: update cpu_capacity 1024
[ 0.051624] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.051687] Brought up 4 CPUs
[ 0.051710] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ 0.051719] CPU: All CPU(s) started in HYP mode.
[ 0.051726] CPU: Virtualization extensions available.
[ 0.052402] devtmpfs: initialized
[ 0.071254] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[ 0.071485] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.072296] pinctrl core: initialized pinctrl subsystem
[ 0.072826] NET: Registered protocol family 16
[ 0.078083] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[ 0.079191] bcm2709.uart_clock = 48000000
[ 0.083105] bcm2709: Mini UART enabled
[ 0.083600] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.083612] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.083761] Serial: AMBA PL011 UART driver
[ 0.083812] uart-pl011 3f201000.uart: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[ 0.083970] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ 0.149111] bcm2708-dmaengine 3f007000.dma: DMA legacy API manager at f3007000, dmachans=0xf35
[ 0.149143] bcm2708-dmaengine 3f007000.dma: Initialized 7 DMA channels (+ 1 legacy)
[ 0.149696] bcm2708-dmaengine 3f007000.dma: Load BCM2835 DMA engine driver
[ 0.149709] bcm2708-dmaengine 3f007000.dma: dma_debug:0
[ 0.150281] SCSI subsystem initialized
[ 0.150464] usbcore: registered new interface driver usbfs
[ 0.150550] usbcore: registered new interface driver hub
[ 0.150648] usbcore: registered new device driver usb
[ 0.151185] raspberrypi-firmware soc:firmware: Attached to firmware from 2016-11-25 16:03
[ 0.178402] Switched to clocksource arch_sys_counter
[ 0.219532] FS-Cache: Loaded
[ 0.219786] CacheFiles: Loaded
[ 0.229102] NET: Registered protocol family 2
[ 0.230047] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.230115] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.230215] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.230279] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.230309] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.230589] NET: Registered protocol family 1
[ 0.230892] RPC: Registered named UNIX socket transport module.
[ 0.230902] RPC: Registered udp transport module.
[ 0.230911] RPC: Registered tcp transport module.
[ 0.230919] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.231988] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[ 0.233040] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.246408] VFS: Disk quotas dquot_6.6.0
[ 0.246722] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.248788] FS-Cache: Netfs 'nfs' registered for caching
[ 0.249697] NFS: Registering the id_resolver key type
[ 0.249739] Key type id_resolver registered
[ 0.249749] Key type id_legacy registered
[ 0.251777] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.251914] io scheduler noop registered
[ 0.251934] io scheduler deadline registered (default)
[ 0.252215] io scheduler cfq registered
[ 0.254452] BCM2708FB: allocated DMA memory de800000
[ 0.254477] BCM2708FB: allocated DMA channel 0 @ f3007000
[ 0.259866] Console: switching to colour frame buffer device 80x30
[ 0.263055] Serial: 8250/16550 driver, 0 ports, IRQ sharing disabled
[ 0.264130] of_serial: probe of 3f215040.uart failed with error -28
[ 0.264797] vc-cma: Videocore CMA driver
[ 0.264808] vc-cma: vc_cma_base = 0x00000000
[ 0.264817] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
[ 0.264826] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
[ 0.264987] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
[ 0.276452] brd: module loaded
[ 0.283529] loop: module loaded
[ 0.284328] vchiq: vchiq_init_state: slot_zero = 0x9e880000, is_master = 0
[ 0.285772] Loading iSCSI transport class v2.0-870.
[ 0.286417] usbcore: registered new interface driver smsc95xx
[ 0.286465] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.486732] Core Release: 2.80a
[ 0.486745] Setting default values for core params
[ 0.486778] Finished setting default values for core params
[ 0.687120] Using Buffer DMA mode
[ 0.687130] Periodic Transfer Interrupt Enhancement - disabled
[ 0.687138] Multiprocessor Interrupt Enhancement - disabled
[ 0.687147] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 0.687161] Dedicated Tx FIFOs mode
[ 0.687421] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0x9e814000 dma = 0xde814000 len=9024
[ 0.687449] FIQ FSM acceleration enabled for :
[ 0.687449] Non-periodic Split Transactions
[ 0.687449] Periodic Split Transactions
[ 0.687449] High-Speed Isochronous Endpoints
[ 0.687469] dwc_otg: Microframe scheduler enabled
[ 0.687513] WARN::hcd_init_fiq:412: FIQ on core 1 at 0x80417640
[ 0.687527] WARN::hcd_init_fiq:413: FIQ ASM at 0x804179b0 length 36
[ 0.687541] WARN::hcd_init_fiq:438: MPHI regs_base at 0x9f89c000
[ 0.687575] dwc_otg 3f980000.usb: DWC OTG Controller
[ 0.687610] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ 0.687642] dwc_otg 3f980000.usb: irq 32, io mem 0x00000000
[ 0.687693] Init: Port Power? op_state=1
[ 0.687701] Init: Power Port (0)
[ 0.687889] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.687904] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.687917] usb usb1: Product: DWC OTG Controller
[ 0.687929] usb usb1: Manufacturer: Linux 4.1.19-v7 dwc_otg_hcd
[ 0.687941] usb usb1: SerialNumber: 3f980000.usb
[ 0.688614] hub 1-0:1.0: USB hub found
[ 0.688657] hub 1-0:1.0: 1 port detected
[ 0.689033] dwc_otg: FIQ enabled
[ 0.689042] dwc_otg: NAK holdoff enabled
[ 0.689050] dwc_otg: FIQ split-transaction FSM enabled
[ 0.689081] Module dwc_common_port init
[ 0.689345] usbcore: registered new interface driver usb-storage
[ 0.689541] mousedev: PS/2 mouse device common for all mice
[ 0.690199] bcm2835-cpufreq: min=600000 max=1200000
[ 0.691829] sdhci: Secure Digital Host Controller Interface driver
[ 0.691834] sdhci: Copyright(c) Pierre Ossman
[ 0.691976] sdhost: log_buf @ 9e813000 (de813000)
[ 0.768410] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 0.790523] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[ 0.790531] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[ 0.825033] mmc0: host does not support reading read-only switch, assuming write-enable
[ 0.826774] mmc0: new high speed SDHC card at address 0001
[ 0.827004] mmcblk0: mmc0:0001 00000 29.8 GiB
[ 0.828465] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.828656] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.828728] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.828834] usbcore: registered new interface driver usbhid
[ 0.828839] usbhid: USB HID core driver
[ 0.829053] Initializing XFRM netlink socket
[ 0.829069] NET: Registered protocol family 17
[ 0.829137] Key type dns_resolver registered
[ 0.829438] Registering SWP/SWPB emulation handler
[ 0.829777] registered taskstats version 1
[ 0.829874] vc-sm: Videocore shared memory driver
[ 0.829882] [vc_sm_connected_init]: start
[ 0.830193] [vc_sm_connected_init]: end - returning 0
[ 0.832571] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 83, base_baud = 0) is a PL011 rev2
[ 0.832713] mmcblk0: p1 p2 < p5 p6 p7 p8 >
[ 0.835094] EXT4-fs (mmcblk0p7): couldn't mount as ext3 due to feature incompatibilities
[ 0.838463] EXT4-fs (mmcblk0p7): couldn't mount as ext2 due to feature incompatibilities
[ 0.847586] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
[ 0.847608] VFS: Mounted root (ext4 filesystem) readonly on device 179:7.
[ 0.851316] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 0.852825] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 0.854332] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 0.854624] devtmpfs: mounted
[ 0.854980] Freeing unused kernel memory: 444K (80795000 - 80804000)
[ 0.857042] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 0.888465] Indeed it is in host mode hprt0 = 00021501
[ 0.943837] mmc1: new high speed SDIO card at address 0001
[ 1.068420] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 1.068509] Indeed it is in host mode hprt0 = 00001101
[ 1.243832] udevd[99]: starting version 3.1.5
[ 1.267487] random: udevd urandom read with 42 bits of entropy available
[ 1.268632] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[ 1.268643] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.269074] hub 1-1:1.0: USB hub found
[ 1.269140] hub 1-1:1.0: 5 ports detected
[ 1.502258] cfg80211: Calling CRDA to update world regulatory domain
[ 1.528722] brcmfmac: brcmf_sdio_drivestrengthinit: No SDIO Drive strength init done for chip 43430 rev 1 pmurev 24
[ 1.529345] usbcore: registered new interface driver brcmfmac
[ 1.548688] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 1.648738] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 1.648755] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.650367] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Dec 15 2015 18:10:45 version 7.45.41.23 (r606571) FWID 01-cc4eda9c
[ 1.651570] smsc95xx v1.0.4
[ 1.669362] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code
[ 1.722119] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:38:2c:05
[ 1.798451] usb 1-1.3: new full-speed USB device number 4 using dwc_otg
[ 1.878411] usb 1-1.3: device descriptor read/64, error -32
[ 2.068403] usb 1-1.3: device descriptor read/64, error -32
[ 2.267951] bcm2835-rng 3f104000.rng: hwrng registered
[ 2.268184] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[ 2.468445] usb 1-1.3: new full-speed USB device number 6 using dwc_otg
[ 2.548445] usb 1-1.3: device descriptor read/64, error -32
[ 2.612133] EXT4-fs (mmcblk0p8): couldn't mount as ext3 due to feature incompatibilities
[ 2.612516] EXT4-fs (mmcblk0p8): couldn't mount as ext2 due to feature incompatibilities
[ 2.738416] usb 1-1.3: device descriptor read/64, error -32
[ 2.744965] EXT4-fs (mmcblk0p8): recovery complete
[ 2.746823] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null)
[ 2.928456] usb 1-1.3: new full-speed USB device number 7 using dwc_otg
[ 3.008432] usb 1-1.3: device descriptor read/64, error -32
[ 3.198464] usb 1-1.3: device descriptor read/64, error -32
[ 3.388503] usb 1-1.3: new full-speed USB device number 8 using dwc_otg
[ 3.808466] usb 1-1.3: device not accepting address 8, error -32
[ 3.888467] usb 1-1.3: new full-speed USB device number 9 using dwc_otg
[ 4.308426] usb 1-1.3: device not accepting address 9, error -32
[ 4.308522] usb 1-1-port3: unable to enumerate USB device
[ 4.508563] Bluetooth: Core ver 2.20
[ 4.508617] NET: Registered protocol family 31
[ 4.508622] Bluetooth: HCI device and connection manager initialized
[ 4.508959] Bluetooth: HCI socket layer initialized
[ 4.508969] Bluetooth: L2CAP socket layer initialized
[ 4.509003] Bluetooth: SCO socket layer initialized
[ 4.593615] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.593627] Bluetooth: BNEP filters: protocol multicast
[ 4.593640] Bluetooth: BNEP socket layer initialized
[ 4.658430] cfg80211: Calling CRDA to update world regulatory domain
[ 5.724350] random: nonblocking pool is initialized
[ 7.818423] cfg80211: Calling CRDA to update world regulatory domain
[ 8.719603] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 10.978438] cfg80211: Calling CRDA to update world regulatory domain
[ 14.138432] cfg80211: Calling CRDA to update world regulatory domain
[ 17.298441] cfg80211: Calling CRDA to update world regulatory domain
[ 18.364527] brcmfmac: brcmf_add_if: ERROR: netdev:wlan0 already exists
[ 18.364542] brcmfmac: brcmf_add_if: ignore IF event
[ 18.368469] brcmfmac: power management disabled
[ 20.458425] cfg80211: Calling CRDA to update world regulatory domain
[ 22.662108] NET: Registered protocol family 10
[ 22.664588] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 23.618463] cfg80211: Calling CRDA to update world regulatory domain
[ 26.778433] cfg80211: Calling CRDA to update world regulatory domain
[ 29.938433] cfg80211: Calling CRDA to update world regulatory domain
[ 33.098434] cfg80211: Calling CRDA to update world regulatory domain
[ 36.258427] cfg80211: Exceeded CRDA call max attempts. Not calling CRDA

@paradadf I connect the USB from 10 seconds or more and disconnect the controller and press the PS button.

Hi, I bought a PS3 clone joystick.
Brand Name: RV77
Model: CECHZC2U

and a bluetooth dongle Cambridge radio.

I tried to connect with the drivers official, shanwan and gasia, with no results

The recalbox version is 4.0.2.

I dont know what to do! please help