@Substring i get this ip adress when i plug in an ethernet cable : fe80::ba27:eb27
Do you know how to fix this?

@Substring I was alble to find to problem i had to set the audio to jack in the .config file.Now the sound works The last problem i have is that when i plug an ethernet cable into the raspberry i do not get an internet connection and a weird ip adress with all kinds of weird numbers and signs appears on the raspberry. Do you know how to fix that? Thanks!

@Substring the first time i used the gameboy i had sound coming from a little speaker or from the jack output when using a headphone..
I had to enable the gpio in config to use the buttons on the gameboy..
But to the sure i should probably open up the gameboy..right?

@Substring it could be bcm2835 too because it is very hard to read the text because of the small screen. What should i do if it is that text?

Thanks for all your help!

@Substring It has a Raspberry pi 3 inside

@Substring it says KOM2835 NL9N

And what should i do then? What do i have to adjust in the programming?

Hi everyone,

i bought an rasperry pi integrated in a gameboy on ebay but the sd card was corrupt so i had to reformat it.
After a while i got the buttons to work using the gpio settings in the config file (controller part).
But now i still don't have audio.I have tried the different settings in the audio settings but i still don't have audio coming from the headphone jacket or speaker.

The other problem i have is that i don't have an ip adress in recalbox so i can't connect it to my network to upload roms.

Does anyone know how to fix these problems?
Thanks!