Handheld Recalbox
-
Hello jj, good job you are my god! But can you explain more about the end of your tutorial from the moment you compile and what emplecement you put the compiled file and how you modify file so that it starts right away? I'm not too good is that you can send me the file as compiled ? Thank you very much for your work!!
-
Hi Cluf20, thanks. Because in recalbox there isn't compilator you can't compile the fbcp directly. It has to be compiled with/in buildroot, don't know how to yet, but there is some totorials on recalbox wiki. A dirty work around you could do is compile it in the SAME raspberry pi, but with other SO that alows you to compile it. In my case i writed an image of raspbian in my SD card and i compiled the fbcp:
sudo apt-get install cmake git clone https://github.com/tasanakorn/rpi-fbcp cd rpi-fbcp/ mkdir build cd build/ cmake .. make
This generates a fbcp file. You can copy this file to your computer, rewrite an image of recalbox in you sd, copy again the file to recalbox, and then you can use it. The compiled file probably won't work in other models of raspberry pi diferent than where it is compiled. Put the fbcp compiled file where you want but remember to use:
chmod +x fbcp
to alow the execution of the file Then for autostart the executable i followed this tutorial in the wiki. In the file S99Custom under /etc/init.d/, you must put the folowing line:
./path_to_the_fbcp_file/fbcp &
replacing path_to_the_fbcp_file with the actual path of the fbcp file. I included my compiled file in the post but you have to be sure to use the same model of raspberry pi (Raspberry Pi 3 Model B) or it won't work. I hope this helps you. In the meantime i'm working in the optimization of the process and in a tutorial for doing it.
-
OK jj what's the extension of your file? I don't see it in your post?
-
JJ, I asked the team if he could compile recalbox basic FBTFT to recalbox for projects of portable consoles . It will be integrated in a future release .
-
Hi, I can't upload the file, i don't know why.
About FBTFT, it is already integrated with recalbox in the beta of the new release. The part that it's missing is the FBCP. So if the team include the FBCP compiled file in the next release it will be awesome, because then we will have al the elements necesary for a TFT screen to work with the GPIOs of the raspberry. The fbcp program is very very lightweight so i don't see any problem to include in recalbox if we ask them politely. And a lot of people will be happy (me included) to use recalbox in a portable console. Thanks. -
Ok so we only need to add this binary to recalbox ? https://github.com/tasanakorn/rpi-fbcp
-
Hi rockaddicted, Yes, with the fbtft already in the beta, the only need is the compiled version fo fbcp, ready for being executed. It will need a litlle bit of extra configuration, but with a good tutorial everyone will be capable of doing it. Thanks!
-
Ok so I'll looking to add it to recalbox, and I'll let you make a full wiki
-
Hello hello! I followed your procedure jj and it works but after restart impossible to run again on the screen. So I hacked ... and it's work for the moment... I detected some errors in your tutorial if you write the wiki I can also watch for mistakes.
-
when I stop the pi and I restart the screen does not work anymore ... I do not understand where it may come ...
-
Yes please!!!, i will make a full wiki happily
About my previous "tutorial", it have to have a lot of mistakes XD. I made it from memory and probably the steps are out of order, or worng. But don't worry, if i write the wiki i'll be sure to write the correct steps and test it. About the screen working at restarting, you have to be sure to write in the file /etc/init.d/S99Custom the line:./path_to_your_fcbp_file/fbcp &
That makes autostart the fbcp executable. And remember if you can't save the file after you modify it, try:
mount -o remount,rw /
And the fbcp must be executable:
chmod +x /path_to_your_fcbp_file/fbcp
Thanks!
-
Yes thanks I do that! I have always the same problem. I need to restart and that's work.... i don't understand...
-
Hi @Cluf20, i'm following with my protable Recalbox project and because i need to add controls to it and the gpio joystick included in recalbox uses some pins that are already used by the TFT screen i decided to fork it and chnage a little bit. I modified the code to alow customization of the gpios used in the module, so you can choose the gpios you want. If you are interested you can check it here. I made a pull request to the repository for those people who want to use it in recalbox.
-
Hi jj, for my project I use a teensy , it allows to be more flexible on the controller . The teensy connects to usb raspberry and after programming is recognized as a Gamepad trade. After you can easily remove and rejouter buttons. IF you are interested I have the program. For the screen , is that you have not forgotten anything in the procedure for it to be recognized after cold reboot ? because each screen reboot is white again as if SPI was more active ? After I have to redo a manipulation to make it work ... search conditions I followed your procedure I remade 5 times lol. I have a doubt against the S99costum contained . In this file you that this line ? If I had my 3D printer I can print the hull !!
-
hello hello jj, I try to rewrite your procedure , do you tell me if I forget something?I try to rewrite your procedure , do you tell me if I forget something? To see where is my error from your screen that works properly ? Change video mode in recalbox.conf: global.videomode=default Enable the SPI bus of the raspberry pi, to do that, write at the end of /boot/config.txt : mount -o remount,rw / mount -o remount,rw /boot nano /boot/config.txt dtparam=spi=on Add to the file /etc/modules.conf : nano /etc/modules.conf spi-bcm2835 After enabling the SPI you can reboot. After reboot you can enable the TFT by using the comand: modprobe fbtft_device name=pitft To make it launch at boot you have to add to the file /etc/modules.conf : mount -o remount,rw / mount -o remount,rw /boot nano /etc/modules.conf fbtft_device Create a file under /etc/modprobe.d/fbtft.conf with the next line of code: nano /etc/modprobe.d/fbtft.conf options fbtft_device custom name=pitft width=320 height=480 rotate=90 speed=62000000 fps=60 Alow execution of the file fbcp: chmod +x /usr/fbcp/fbcp To automatically launch fbcp modify the starting scripts under /etc/init.d/: cd /etc/init.d/ ls cp S00Xxxxx S99custom nano S99custom /usr/fbcp/fbcp & /etc/init.d/S99custom start
-
Hello, I'm going to do a condensed guide for the Adafruit 3.5 inches TFT (I tested other screen, wsaveshare 3.5, and the procedure is a little bit different). Adafruit 3.5: 0. - Note: i don’t know if anyone have this problem, but i read on the forums, and it seem that other people have the same problem. The problem is that when you try to write, you can’t because the file systems is only read. To solve it use:
mount -o remount,rw / mount -o remount,rw /boot
1. - Add to the file /etc/modules.conf
spi-bcm2835 fbtft_device
2, - create a file under /etc/modprobe.d/fbtft.conf with the next line of code:
options fbtft_device custom name=pitft width=320 height=480 rotate=90 speed=62000000 fps=60
3. - Get FBCP, compile it, or copy it. 4. - For autostart, your /etc/init.d/S99custom must look like (is your fbcp file is under /usr/local/bin/fbcp/):
#!/bin/bash ./usr/local/bin/fbcp/fbcp & test -e "/recalbox/share/system/custom.sh" && /recalbox/share/system/custom.sh
5. - Set global.videomode=default in recalbox.conf 6. - Reboot and enjoy I hope this helps you.
-
Hello jj, I think you forget some instructions in your last post like SPI activation.
-
Hello jj, I need your help, I can not operate the screen more than once ... I do not understand..... Thank you for all
-
Bon après un premier essai d'impression j'ai du reprendre le modèle pour une meilleure qualité! Demain, début de l'impression!! Ci-joint le rendu final.
-
Hello hello !!! Le projet avance !!! Après quelques difficultés d'impression, quelques photos du premier montage !
