Perdona por la tardanza pero no tuve tiempo y he estado buscando el dongle.
Creo que era esto lo que me pedías puede ser??
login as: root
root@192.168.1.41's password:
# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.1.19-v7 (root@c4bc7cb1932e) (gcc version 4.9.3 (Buildroot 2016.02-git-dirty) ) #1 SMP Mon Feb 20 15:51:48 UTC 2017
[ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2
[ 0.000000] cma: Reserved 8 MiB at 0x1e400000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat 80880fc0, node_mem_map 9dfa4000
[ 0.000000] Normal zone: 1116 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] [bcm2709_smp_init_cpus] enter (9420->f3003010)
[ 0.000000] [bcm2709_smp_init_cpus] ncores=4
[ 0.000000] PERCPU: Embedded 12 pages/cpu @9efb1000 s20416 r8192 d20544 u49152
[ 0.000000] pcpu-alloc: s20416 r8192 d20544 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125860
[ 0.000000] Kernel command line: 8250.nr_uarts=0 dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2709.boardrev=0xa02082 bcm2709.serial=0xf3204575 smsc95xx.macaddr=B8:27:EB:20:45:75 bcm2708_fb.fbswap=1 bcm2709.uart_clock=48000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 dwc_otg.fiq_fix_enable=1 sdhci-bcm2708.sync_after_dma=0 dwc_otg.lpm_enable=0 console=tty3 loglevel=3 elevator=deadline vt.global_cursor_default=0 logo.nologo root=/dev/mmcblk0p7 rootwait fastboot noswap ro
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 485052K/507904K available (6064K kernel code, 534K rwdata, 1664K rodata, 444K init, 757K bss, 14660K reserved, 8192K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0x9f800000 - 0xff000000 (1528 MB)
[ 0.000000] lowmem : 0x80000000 - 0x9f000000 ( 496 MB)
[ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
[ 0.000000] .text : 0x80008000 - 0x807945dc (7730 kB)
[ 0.000000] .init : 0x80795000 - 0x80804000 ( 444 kB)
[ 0.000000] .data : 0x80804000 - 0x80889b10 ( 535 kB)
[ 0.000000] .bss : 0x8088c000 - 0x809497dc ( 758 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Additional per-CPU info printed with stalls.
[ 0.000000] NR_IRQS:608
[ 0.000000] Architected cp15 timer(s) running at 19.20MHz (phys).
[ 0.000000] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000008] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000025] Switching to timer-based delay loop, resolution 52ns
[ 0.000242] Console: colour dummy device 80x30
[ 0.000439] console [tty3] enabled
[ 0.000468] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.000487] pid_max: default: 32768 minimum: 301
[ 0.000781] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000797] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.001741] Initializing cgroup subsys blkio
[ 0.001766] Initializing cgroup subsys memory
[ 0.001790] Initializing cgroup subsys devices
[ 0.001808] Initializing cgroup subsys freezer
[ 0.001834] Initializing cgroup subsys net_cls
[ 0.001883] CPU: Testing write buffer coherency: ok
[ 0.001941] ftrace: allocating 20313 entries in 60 pages
[ 0.048478] CPU0: update cpu_capacity 1024
[ 0.048508] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.048520] [bcm2709_smp_prepare_cpus] enter
[ 0.048658] Setting up static identity map for 0x8240 - 0x8274
[ 0.050409] [bcm2709_boot_secondary] cpu:1 started (0) 18
[ 0.050601] [bcm2709_secondary_init] enter cpu:1
[ 0.050645] CPU1: update cpu_capacity 1024
[ 0.050651] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.051033] [bcm2709_boot_secondary] cpu:2 started (0) 17
[ 0.051197] [bcm2709_secondary_init] enter cpu:2
[ 0.051218] CPU2: update cpu_capacity 1024
[ 0.051225] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.051587] [bcm2709_boot_secondary] cpu:3 started (0) 16
[ 0.051718] [bcm2709_secondary_init] enter cpu:3
[ 0.051739] CPU3: update cpu_capacity 1024
[ 0.051745] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.051806] Brought up 4 CPUs
[ 0.051829] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ 0.051838] CPU: All CPU(s) started in HYP mode.
[ 0.051845] CPU: Virtualization extensions available.
[ 0.052523] devtmpfs: initialized
[ 0.071369] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[ 0.071599] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.072409] pinctrl core: initialized pinctrl subsystem
[ 0.072937] NET: Registered protocol family 16
[ 0.078186] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[ 0.079298] bcm2709.uart_clock = 48000000
[ 0.083201] bcm2709: Mini UART enabled
[ 0.083697] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.083707] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.083856] Serial: AMBA PL011 UART driver
[ 0.083907] uart-pl011 3f201000.uart: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[ 0.084065] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ 0.149231] bcm2708-dmaengine 3f007000.dma: DMA legacy API manager at f3007000, dmachans=0xf35
[ 0.149264] bcm2708-dmaengine 3f007000.dma: Initialized 7 DMA channels (+ 1 legacy)
[ 0.149816] bcm2708-dmaengine 3f007000.dma: Load BCM2835 DMA engine driver
[ 0.149830] bcm2708-dmaengine 3f007000.dma: dma_debug:0
[ 0.150401] SCSI subsystem initialized
[ 0.150584] usbcore: registered new interface driver usbfs
[ 0.150669] usbcore: registered new interface driver hub
[ 0.150767] usbcore: registered new device driver usb
[ 0.151303] raspberrypi-firmware soc:firmware: Attached to firmware from 2016-11-25 16:03
[ 0.178512] Switched to clocksource arch_sys_counter
[ 0.219582] FS-Cache: Loaded
[ 0.219836] CacheFiles: Loaded
[ 0.229165] NET: Registered protocol family 2
[ 0.230110] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.230178] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.230278] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.230343] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.230373] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.230653] NET: Registered protocol family 1
[ 0.230955] RPC: Registered named UNIX socket transport module.
[ 0.230965] RPC: Registered udp transport module.
[ 0.230974] RPC: Registered tcp transport module.
[ 0.230982] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.232052] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[ 0.233103] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.246471] VFS: Disk quotas dquot_6.6.0
[ 0.246785] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.248852] FS-Cache: Netfs 'nfs' registered for caching
[ 0.249761] NFS: Registering the id_resolver key type
[ 0.249803] Key type id_resolver registered
[ 0.249813] Key type id_legacy registered
[ 0.251832] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.251956] io scheduler noop registered
[ 0.251976] io scheduler deadline registered (default)
[ 0.252257] io scheduler cfq registered
[ 0.254492] BCM2708FB: allocated DMA memory de800000
[ 0.254517] BCM2708FB: allocated DMA channel 0 @ f3007000
[ 0.284563] Console: switching to colour frame buffer device 240x67
[ 0.302957] Serial: 8250/16550 driver, 0 ports, IRQ sharing disabled
[ 0.304052] of_serial: probe of 3f215040.uart failed with error -28
[ 0.304741] vc-cma: Videocore CMA driver
[ 0.304752] vc-cma: vc_cma_base = 0x00000000
[ 0.304761] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
[ 0.304770] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
[ 0.304935] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
[ 0.316415] brd: module loaded
[ 0.323517] loop: module loaded
[ 0.324355] vchiq: vchiq_init_state: slot_zero = 0x9e880000, is_master = 0
[ 0.325864] Loading iSCSI transport class v2.0-870.
[ 0.326529] usbcore: registered new interface driver smsc95xx
[ 0.326578] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 0.526862] Core Release: 2.80a
[ 0.526876] Setting default values for core params
[ 0.526911] Finished setting default values for core params
[ 0.727259] Using Buffer DMA mode
[ 0.727269] Periodic Transfer Interrupt Enhancement - disabled
[ 0.727278] Multiprocessor Interrupt Enhancement - disabled
[ 0.727287] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 0.727306] Dedicated Tx FIFOs mode
[ 0.727575] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0x9e814000 dma = 0xde814000 len=9024
[ 0.727606] FIQ FSM acceleration enabled for :
[ 0.727606] Non-periodic Split Transactions
[ 0.727606] Periodic Split Transactions
[ 0.727606] High-Speed Isochronous Endpoints
[ 0.727626] dwc_otg: Microframe scheduler enabled
[ 0.727676] WARN::hcd_init_fiq:412: FIQ on core 1 at 0x80417640
[ 0.727691] WARN::hcd_init_fiq:413: FIQ ASM at 0x804179b0 length 36
[ 0.727706] WARN::hcd_init_fiq:438: MPHI regs_base at 0x9f89c000
[ 0.727740] dwc_otg 3f980000.usb: DWC OTG Controller
[ 0.727777] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ 0.727808] dwc_otg 3f980000.usb: irq 32, io mem 0x00000000
[ 0.727860] Init: Port Power? op_state=1
[ 0.727868] Init: Power Port (0)
[ 0.728061] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.728076] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.728089] usb usb1: Product: DWC OTG Controller
[ 0.728101] usb usb1: Manufacturer: Linux 4.1.19-v7 dwc_otg_hcd
[ 0.728113] usb usb1: SerialNumber: 3f980000.usb
[ 0.728830] hub 1-0:1.0: USB hub found
[ 0.728872] hub 1-0:1.0: 1 port detected
[ 0.729249] dwc_otg: FIQ enabled
[ 0.729258] dwc_otg: NAK holdoff enabled
[ 0.729266] dwc_otg: FIQ split-transaction FSM enabled
[ 0.729297] Module dwc_common_port init
[ 0.729567] usbcore: registered new interface driver usb-storage
[ 0.729767] mousedev: PS/2 mouse device common for all mice
[ 0.730424] bcm2835-cpufreq: min=600000 max=1200000
[ 0.732052] sdhci: Secure Digital Host Controller Interface driver
[ 0.732056] sdhci: Copyright(c) Pierre Ossman
[ 0.732209] sdhost: log_buf @ 9e813000 (de813000)
[ 0.808521] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 0.830641] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[ 0.830649] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[ 0.868558] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.868746] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.868813] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.868913] usbcore: registered new interface driver usbhid
[ 0.868918] usbhid: USB HID core driver
[ 0.869138] Initializing XFRM netlink socket
[ 0.869155] NET: Registered protocol family 17
[ 0.869225] Key type dns_resolver registered
[ 0.869527] Registering SWP/SWPB emulation handler
[ 0.869857] registered taskstats version 1
[ 0.869957] vc-sm: Videocore shared memory driver
[ 0.869965] [vc_sm_connected_init]: start
[ 0.870250] [vc_sm_connected_init]: end - returning 0
[ 0.872611] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 83, base_baud = 0) is a PL011 rev2
[ 0.873448] Waiting for root device /dev/mmcblk0p7...
[ 0.907609] mmc0: host does not support reading read-only switch, assuming write-enable
[ 0.910993] mmc0: new high speed SDHC card at address aaaa
[ 0.911233] mmcblk0: mmc0:aaaa SL32G 29.7 GiB
[ 0.917670] mmcblk0: p1 p2 < p5 p6 p7 p8 >
[ 0.928569] Indeed it is in host mode hprt0 = 00021501
[ 0.936176] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 0.937675] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 0.939173] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 0.941862] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 0.979293] EXT4-fs (mmcblk0p7): couldn't mount as ext3 due to feature incompatibilities
[ 0.979732] EXT4-fs (mmcblk0p7): couldn't mount as ext2 due to feature incompatibilities
[ 0.989714] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
[ 0.989742] VFS: Mounted root (ext4 filesystem) readonly on device 179:7.
[ 0.998224] devtmpfs: mounted
[ 0.998635] Freeing unused kernel memory: 444K (80795000 - 80804000)
[ 1.029454] mmc1: new high speed SDIO card at address 0001
[ 1.108553] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 1.108646] Indeed it is in host mode hprt0 = 00001101
[ 1.308757] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[ 1.308762] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.309158] hub 1-1:1.0: USB hub found
[ 1.309205] hub 1-1:1.0: 5 ports detected
[ 1.431462] udevd[99]: starting version 3.1.5
[ 1.457438] random: udevd urandom read with 62 bits of entropy available
[ 1.588591] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 1.712291] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 1.712318] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.715022] smsc95xx v1.0.4
[ 1.778963] cfg80211: Calling CRDA to update world regulatory domain
[ 1.850928] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:20:45:75
[ 1.877635] brcmfmac: brcmf_sdio_drivestrengthinit: No SDIO Drive strength init done for chip 43430 rev 1 pmurev 24
[ 1.878162] usbcore: registered new interface driver brcmfmac
[ 1.952736] random: nonblocking pool is initialized
[ 2.033658] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Dec 15 2015 18:10:45 version 7.45.41.23 (r606571) FWID 01-cc4eda9c
[ 2.050101] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code
[ 2.088625] usb 1-1.3: new full-speed USB device number 4 using dwc_otg
[ 2.198319] usb 1-1.3: New USB device found, idVendor=24ae, idProduct=2000
[ 2.198346] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.198353] usb 1-1.3: Product: RAPOO 2.4G Wireless Device
[ 2.198360] usb 1-1.3: Manufacturer: RAPOO
[ 2.431973] bcm2835-rng 3f104000.rng: hwrng registered
[ 2.432398] input: RAPOO RAPOO 2.4G Wireless Device as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/0003:24AE:2000.0001/input/input0
[ 2.432607] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[ 2.488745] hid-generic 0003:24AE:2000.0001: input,hidraw0: USB HID v1.01 Keyboard [RAPOO RAPOO 2.4G Wireless Device] on usb-3f980000.usb-1.3/input0
[ 2.495774] input: RAPOO RAPOO 2.4G Wireless Device as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.1/0003:24AE:2000.0002/input/input1
[ 2.548936] hid-generic 0003:24AE:2000.0002: input,hiddev0,hidraw1: USB HID v1.01 Mouse [RAPOO RAPOO 2.4G Wireless Device] on usb-3f980000.usb-1.3/input1
[ 2.788533] usb 1-1.5: new full-speed USB device number 5 using dwc_otg
[ 2.902634] usb 1-1.5: New USB device found, idVendor=0a12, idProduct=0001
[ 2.902643] usb 1-1.5: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 2.902650] usb 1-1.5: Product: CSR8510 A10
[ 2.954648] Bluetooth: Core ver 2.20
[ 2.954713] NET: Registered protocol family 31
[ 2.954719] Bluetooth: HCI device and connection manager initialized
[ 2.954737] Bluetooth: HCI socket layer initialized
[ 2.954748] Bluetooth: L2CAP socket layer initialized
[ 2.954767] Bluetooth: SCO socket layer initialized
[ 2.964274] usbcore: registered new interface driver btusb
[ 3.087787] EXT4-fs (mmcblk0p8): couldn't mount as ext3 due to feature incompatibilities
[ 3.088204] EXT4-fs (mmcblk0p8): couldn't mount as ext2 due to feature incompatibilities
[ 3.094323] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null)
[ 4.938545] cfg80211: Calling CRDA to update world regulatory domain
[ 4.941721] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.941734] Bluetooth: BNEP filters: protocol multicast
[ 4.941748] Bluetooth: BNEP socket layer initialized
[ 4.979101] Bluetooth: RFCOMM TTY layer initialized
[ 4.979123] Bluetooth: RFCOMM socket layer initialized
[ 4.979152] Bluetooth: RFCOMM ver 1.11
[ 8.098590] cfg80211: Calling CRDA to update world regulatory domain
[ 9.230039] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 10.777389] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
[ 11.258578] cfg80211: Calling CRDA to update world regulatory domain
[ 14.418566] cfg80211: Calling CRDA to update world regulatory domain
[ 15.167134] NET: Registered protocol family 10
[ 17.578583] cfg80211: Calling CRDA to update world regulatory domain
[ 20.738572] cfg80211: Calling CRDA to update world regulatory domain
[ 23.898543] cfg80211: Calling CRDA to update world regulatory domain
[ 27.058548] cfg80211: Calling CRDA to update world regulatory domain
[ 30.218571] cfg80211: Calling CRDA to update world regulatory domain
[ 33.378548] cfg80211: Calling CRDA to update world regulatory domain
[ 36.538556] cfg80211: Exceeded CRDA call max attempts. Not calling CRDA
#
A ver si con esto me puedes decir que comando debo poner para que funcione el controlados de ps3 chino que tengo rosa.
Muchas gracias!!!!!
