Bonjour à tous !
Je viens tout juste d'installer ma recalbox X64 sur un PC avec une carte mère de PC portable.
Problème: je suis bloqué sur l’écran de splashscreen et rien ne se passe. J'ai donc tenté un demarrage en mode verbose et voilà ce que j'arrive à lire:
Xlib: extension "GLX" mimssing on display ":0"
(ERROR) : Error creating SDL window!
GLX is not supported
En cherchant un peu sur le net, j'ai l'impression que c'est une histoire de driver de carte graphique mais je ne sais pas bien quoi faire. Ma carte graphique est celle de la carte mère (Intel HD Graphic 530):
# lspci
00:00.0 Host bridge: Intel Corporation Skylake Host Bridge/DRAM Registers (rev 07)
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 530 (rev 06)
00:14.0 USB controller: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller (rev 31)
00:16.0 Communication controller: Intel Corporation Sunrise Point-H CSME HECI #1 (rev 31)
00:17.0 SATA controller: Intel Corporation Sunrise Point-H SATA controller [AHCI mode] (rev 31)
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #5 (rev f1)
00:1d.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #9 (rev f1)
00:1f.0 ISA bridge: Intel Corporation Sunrise Point-H LPC Controller (rev 31)
00:1f.2 Memory controller: Intel Corporation Sunrise Point-H PMC (rev 31)
00:1f.3 Audio device: Intel Corporation Sunrise Point-H HD Audio (rev 31)
00:1f.4 SMBus: Intel Corporation Sunrise Point-H SMBus (rev 31)
00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (2) I219-V (rev 31)
Rien de particulier dans les logs recalbox (si ce n'est un soucis de son mais je ne pense que cela soit la source de mon problème):
[ 1.85] Wifi option disabled
[ 2.14] [ 1.85] Wifi option disabled
es
[ 2.16] Running MIGRATIONS…
[ 2.16] RENAMED 'vb' core to 'mednafen_vb' in /recalbox/share/system/recalbox.conf.
[ 2.17] RENAMED 'pce' core to 'mednafen_pce_fast' in /recalbox/share/system/recalbox.conf.
[ 2.17] RENAMED 'fba' core to 'fbneo' in /recalbox/share/system/recalbox.conf.
[ 2.17] RENAMED 'mame078' core to 'mame2003' in /recalbox/share/system/recalbox.conf.
[ 2.17] RENAMED 'pocketsnes' core to 'snes9x2002' in /recalbox/share/system/recalbox.conf.
[ 2.17] RENAMED 'imame' core to 'mame2000' in /recalbox/share/system/recalbox.conf.
[ 2.18] RENAMED 'fbalpha' core to 'fbneo' in /recalbox/share/system/recalbox.conf.
[ 2.18] RENAMED 'snes9x_next' core to 'snes9x2010' in /recalbox/share/system/recalbox.conf.
[ 2.18] RENAMED 'catsfc' core to 'snes9x2005' in /recalbox/share/system/recalbox.conf.
[ 2.18] RENAMED 'glupen64' core to 'mupen64plus' in /recalbox/share/system/recalbox.conf.
[ 2.18] UPDATED Virtual Gamepad configuration to new 'es_input.cfg' format.
[ 2.20] B*MPED webmanager version in /recalbox/share/system/recalbox.conf.
[ 2.23] starting new log
[ 2.23] converting dos to unix carriage return characters
[ 2.24] setting hostname to RECALBOX
[ 2.24] setting audio volume to 90
[ 2.24] setting keyboard layout to en
[ 2.24] setting timezone to Europe/Paris
[ 2.25] ---- recalbox-config.sh ----
[ 2.25] setting audio volume : 90
[ 2.24] cannot open file en
[ 2.24] Simple mixer control 'Master',0
[ 2.24] Capabilities: pvolume pswitch
[ 2.24] Playback channels: Front Left - Front Right
[ 2.24] Limits: Playback 0 - 87
[ 2.24] Mono:
[ 2.24] Front Left: Playback 0 [0%] [-65.25dB] [on]
[ 2.24] Front Right: Playback 0 [0%] [-65.25dB] [on]
[ 2.26] Setting volume for numid=2
[ 2.26] Setting volume for numid=1
[ 2.27] Setting volume for numid=5
[ 2.27] Setting volume for numid=4
[ 2.27] Setting volume for numid=18
[ 2.24] amixer: Control default element write error: Operation not permitted
[ 2.24]
[ 2.27] Setting volume for numid=23
[ 2.24] amixer: Control default element write error: Operation not permitted
[ 2.24]
[ 2.27] Setting volume for numid=28
[ 2.24] amixer: Control default element write error: Operation not permitted
[ 2.24]
[ 2.28] Setting volume for numid=19
[ 2.24] amixer: Control default element write error: Operation not permitted
[ 2.24]
[ 2.28] Setting volume for numid=24
[ 2.24] amixer: Control default element write error: Operation not permitted
[ 2.24]
[ 2.28] Setting volume for numid=29
[ 2.24] amixer: Control default element write error: Operation not permitted
[ 2.24]
[ 2.28] Setting volume for numid=20
[ 2.28] Setting volume for numid=25
[ 2.29] Setting volume for numid=30
[ 2.29] Setting volume for numid=21
[ 2.29] Setting volume for numid=26
[ 2.29] Setting volume for numid=31
[ 2.29] Setting volume for numid=7
[ 2.30] Setting volume for numid=6
[ 2.30] Setting volume for numid=15
[ 2.24] amixer: Control default element write error: Operation not permitted
[ 2.24]
[ 2.30] Setting volume for numid=33
[ 2.30] Setting volume for numid=34
[ 2.30] Setting volume for numid=35
[ 2.31] Restoring ALSA mixers configuration
[ 2.31] setting audio to auto
[ 2.31] ---- recalbox-config.sh ----
[ 2.32] Unknown audio format : auto
[ 2.32] starting emulationstation with lang = en_US
[ 2.32] Starting emulationstation with command :
[ 2.33] HOME=/recalbox/share/system startx
[ 2.35] ---- recalbox-config.sh ----
[ 2.66] Starting S92switch
[ 2.66] script /recalbox/scripts/powerswitch.sh [ STARTED ]
[ 2.67] Starting S94manager
[ 2.67] ... Starting manager v2
[ 10.32] starting xarcade2jstick
[ 10.49] xarcade2jstick : no official stick found, looking for keyboard encoder now ...
Par contre dans les logs Xorg j'ai:
# cat /var/log/Xorg.0.log | grep EE
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2.529] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
[ 2.718] (EE) Error loading keymap /tmp/server-0.xkm
Voilà si quelqu'un a une piste je serais ravi 
Merci !
