Raspberry Pi 4
For information, Recalbox IS NOT compatible with Raspberry Pi 4 yet.
Pour information, Recalbox N'EST PAS encore compatible avec le Raspberry Pi 4.
The Recalbox Team.
WiFi is not working on Pi 3B or Pi 3B+
No I'm using the internal chip.
As I described in my opening post I already set the country code to DE.
Do you need more information?
@darth_joghurt Which version of Recalbox are you using?
Have you set up the system yourself, or are you using a ready-made downloaded image from the internet?
Are you sure that the wifi did not connect? In my RPi3, sometimes when turning on the wifi shows as disconnected, but I can access the recalbox manager by the smartphone without any problem, you were only based on the information "disconnected" or tested?
Hi, I had problems by configuring my 2,4 GHz WiFi using channel 12 and 13. At least with Pi3 B and latest Recalbox stable. Seems that Pi (or Recalbox?) does not support these channels.
Maybe this helps...
See also here at:
„WLAN-Autokanal inklusive Kanal 12/13“
Hi, I used the latest stable version for the 3B and the Christmas-beta for the 3B+. I've set up the systems by myself, no pre-made images from the internet.
The connection was testet by trying to get access through the manager.
I've already changed the wifi channel to 8 but that didn't work too.
@darth_joghurt is the SSID is found, it means wifi works and your router is seen by Recalbox. Besides, for an unkwnown reason yet it cannot connect, and I bet it's password related, or maybe some security on your router side. Just WPA2 ? Not enterprise preshared key or something like that ?
Special caracter in wifi key ?
No there are no special security settings on my router. My password is only numbers. All devices are allowed to connect to the router.
@darth_joghurt what is your wifi key encryption ?
@Scavy what do you mean with encryption?
Hi guys, I have solved the problem. I thought I had the function "only allow known devices in the Wi-Fi" disabled and set to "allow all devices". Unfortunately, my router has not adopted the setting. After I changed it, everything worked
@darth_joghurt great :)