Raspberry Pi 4

For information, Recalbox IS NOT compatible with Raspberry Pi 4 yet.
Pour information, Recalbox N'EST PAS encore compatible avec le Raspberry Pi 4.

The Recalbox Team.

Testers wanted: major system upgrade (Pi3b+, KODI 17 and much more ...)


  • Developer
    Team
    Global moderator

    @pattick76 please read the first post. No update possible.



  • Atari 800 -> RPi 3B = OK
    Atari 7800 -> RPi 3B = OK

    Atari 800 -> PC 64bits = ne se lance pas
    Atari 7800 -> PC 64bits = ne se lance pas



  • Hello I made a fresch flash with the Christmas beta and now the Dreamcast games don't start anymore.
    Anybody else have this problem?


  • Local Moderator
    Tester

    @OyyoDams, @paradadf
    Dear All dev team
    Thanks a lot for all works performed

    Board : XU4
    Image : 2018.12.24.Christmas.Beta

    Issue : I can not connect with SSH,
    also, I failed to get support archive link 😞

    Regards
    0_1545748147581_2018-12-25.PNG


  • Developer
    Global moderator
    Team

    @olivierdroid92 maybe because old ssh keys are still registered in putty, try to reset them



  • @olivierdroid92 J'ai eu le mĂȘme problĂšme : il faut appuyer trĂšs lĂ©gĂšrement sur L2 et R2 sinon ça s'emballe.
    I had the same issue : you have to press L2 and R2 gently or you'll get into trouble.


  • Developer
    Global moderator
    Team

    @smashboy2000 quel rapport entre putty et L2/R2 ?



  • @oyyodams Aucun : regarde le message auquel je rĂ©pond.

    ... Oh flĂ»te, j'ai rĂ©pondu Ă  un message vieux de 4 mois en croyant qu'il venait d'ĂȘtre postĂ©.
    Cette page regroupe toutes les updates en fait, c'est ça ? (j'suis encore novice dans ce forum)



  • AprĂšs une petite demi-heure de test sur mon Rapsberry Pi 3, quelques conclusions :

    • Tous les jeux qui fonctionnaient avant, fonctionnent toujours
    • Mes jeux PSP ne fonctionnaient pas : c'est dorĂ©navant le cas ^^
    • Seul problĂšme rencontrĂ© : au moment de configurer la manette PS4, il m'est impossible d'assigner le touchpad Ă  un bouton

    Je n'utilise pas le Wi-Fi ni de clavier, je n'ai donc pas pu essayer.


  • Local Moderator
    Tester

    @oyyodams

    Board : XU4 (192.168.4.105)
    Image : 2018.12.24.Christmas.Beta
    I've tried again with another system and can not acces to XU4 using SSH0_1545760613728_Capture du 2018-12-25 18-51-30.png
    I did not get the box to update key

    Board : RPI3B (192.168.4.106)
    Image : 2018-07-13
    It's work
    I confirm key was updated

    0_1545760958260_Capture du 2018-12-25 19-02-01.png



  • Pas d'update c'est bien pour ceux qui non encore rien installer sur leurs PI3B+ mais pour les autres il faut attendre une mise a jour ou c'est mort??


  • Developer
    Global moderator
    Team

    @marco-polo vu la complexitĂ© de cette mise Ă  jour, il est difficilement concevable d'envisager une mise Ă  jour standard justement. PrĂ©vois un backup de tes roms 😉



  • @paradadf Bump 507 RPI3 (2018/11/12) beta was the best release for me! Running like a stable release with everything working. All my games from 20 Systems, PS4-Bluetooth-Controller, 5GHz-Wifi,1500Mhz-overclocking, overall stability on my RPi3B+...everything just running perfectly. Nice to have it. Thanks for good work!
    Where can I find my UI-settings, overall gameplay- and emulatorsettings, audio etc. stored to copy&paste them later into the future final release (foldername?/filename?)? Not all my menu-settings are stored in the recalbox.conf(?). (My games are stored on external USB-drive.)
    Thanks for reply. đŸ€“



  • @oyyodams Je vais prĂ©voir cela, en tout cas super taf de la team Recalbox et beau cadeau de noĂ«l pour les Retro Gamers que nous sommes ^^
    Juste les roms pour le backup pas autre choses avant de me lancer?



  • Bonjour je joue avec une manette PS4 dans les menus celle ci ne fonctionne dans aucun jeu



  • J'utilise un raspberry pi 3 b+



  • Ça y est j'ai sauter le pas 😛 par contre il m'est impossible d’associer ma 8bitdo NES30 Pro, il la trouve bien mais "impossible d'associer la manette" 😕 et les touche A et B sont inverser sur ma manette filaire Xbox !


  • Local Moderator
    Tester

    @OyyoDams
    I think there is a SSH issue

    Image : 2018.12.24.Christmas.Beta on XU4 = SSH access failed
    Image : 2018.12.24.Christmas.Beta on RPI3B = SSH access failed
    Image : 2018.07.13 on both RPI3 and XU4 = SSH access granted



  • @olivierdroid92 said in Testers wanted: major system upgrade (Pi3b+, KODI 17 and much more ...):

    @OyyoDams
    I think there is a SSH issue

    Image : 2018.12.24.Christmas.Beta on XU4 = SSH access failed
    Image : 2018.12.24.Christmas.Beta on RPI3B = SSH access failed
    Image : 2018.07.13 on both RPI3 and XU4 = SSH access granted

    I somehow experienced the same. I actually was able to SSH in, but since I have chosen external storage devices, SSH will tell me the connection was closed by xxxx. Not sure if those are related.



  • I'm fairly new here, Christmas beta was actually the first recalbox I have installed on RPI3B+.
    This is driving me nuts. I tried to modify the save/load state keys mapping and change to left/right shoulder button. However, every time I modify the file retroarchcustom.cfg, it gets reverted once I enter the game. With a yellow text below saying "Configuration Override loaded", which I assume was doing the change.

    I also modified the input/DEFAULT.cfg file but it doesn't seem helpful either.

    And the config file in share_init folder, I modified what I could find, not helpful.

    So who's reverting those files? I'm rather confused. What should I do to change those settings?



Want to support us ?

225
Online

77.2k
Users

19.4k
Topics

144.0k
Posts