Raspberry Pi 4

For information, Recalbox IS NOT compatible with Raspberry Pi 4 yet.
Pour information, Recalbox N'EST PAS encore compatible avec le Raspberry Pi 4.

The Recalbox Team.

Testers wanted: major system upgrade (Pi3b+, KODI 17 and much more ...)



  • Hi,

    Thanks for new release! First, in my point of view it‘s a good decision making a hard cut when changes in new version are too complex for an update. Doing a fresh installation is no big deal at all an I‘m sure it avoids mans update related issues.

    Unfortunately I also have to report an issue, Wifi still seems to make some troubles:
    It seems it connects faster and more stable than latest beta, but on my side there are heavy interferrences with internal bluetooth. I‘m connected to a 2,4 GHz network and as soon as I activate Wifi, Bluetooth lags or even loses connection until i go closer (reduce distance to <2 meters).
    Further I want do report that Recalbox (or Emulationstation) hang about at least 1 minute after first Wifi activation. No reaction at all. Already wanted to remove power supply when it suddenly has shown message „Wifi activated“ though.

    Thanks for spending so many of your time for this project, it‘s really great and I‘m looking forward to final new version. Especially because I have big issues with all newer 8bitdo controllers (random loss of whole pairing), which seems to be gone with new version!

    and: Happy x-mas! :)

    Edit:
    Please ignore interferrence issue for now. Rebooted my Wifi Repeater and it‘s gone for now. Haven‘t ever had such an issue befor, I‘ll keep you informed.



  • Bonjours et bonne fêtes@tous

    J'ai pas tout compris, Il faut effacer si on veut la nouvelle version? Pas d'upgrade possible?



  • @lhari84
    Sorry, have to reply instead of further updating last post, because of some spam protection...:
    Really have troubles with Wifi, connection just crashes when copying just 16 Megabytes of savegames by using SMB share.
    Can exclude a problem with my Wifi, all clients, including latest Recalbox stable work like a charm with my wireless network, so problem occurs with latest beta only.
    See screenshot (ping) too, in the end copy process crashes because auf connection loss:
    0_1545690969500_2018-12-24_233118.jpg

    Also interferrence with bluetooth controller is still present.
    And I'm using Pi 3 B+ for testing.


  • Staff
    Team
    Moderator
    Translator

    @pattick76 please read the first post. No update possible.



  • Atari 800 -> RPi 3B = OK
    Atari 7800 -> RPi 3B = OK

    Atari 800 -> PC 64bits = ne se lance pas
    Atari 7800 -> PC 64bits = ne se lance pas



  • Hello I made a fresch flash with the Christmas beta and now the Dreamcast games don't start anymore.
    Anybody else have this problem?


  • Tester

    @OyyoDams, @paradadf
    Dear All dev team
    Thanks a lot for all works performed

    Board : XU4
    Image : 2018.12.24.Christmas.Beta

    Issue : I can not connect with SSH,
    also, I failed to get support archive link :(

    Regards
    0_1545748147581_2018-12-25.PNG


  • Staff
    Moderator
    Team

    @olivierdroid92 maybe because old ssh keys are still registered in putty, try to reset them



  • @olivierdroid92 J'ai eu le même problème : il faut appuyer très légèrement sur L2 et R2 sinon ça s'emballe.
    I had the same issue : you have to press L2 and R2 gently or you'll get into trouble.


  • Staff
    Moderator
    Team

    @smashboy2000 quel rapport entre putty et L2/R2 ?



  • @oyyodams Aucun : regarde le message auquel je répond.

    ... Oh flûte, j'ai répondu à un message vieux de 4 mois en croyant qu'il venait d'être posté.
    Cette page regroupe toutes les updates en fait, c'est ça ? (j'suis encore novice dans ce forum)



  • Après une petite demi-heure de test sur mon Rapsberry Pi 3, quelques conclusions :

    • Tous les jeux qui fonctionnaient avant, fonctionnent toujours
    • Mes jeux PSP ne fonctionnaient pas : c'est dorénavant le cas ^^
    • Seul problème rencontré : au moment de configurer la manette PS4, il m'est impossible d'assigner le touchpad à un bouton

    Je n'utilise pas le Wi-Fi ni de clavier, je n'ai donc pas pu essayer.


  • Tester

    @oyyodams

    Board : XU4 (192.168.4.105)
    Image : 2018.12.24.Christmas.Beta
    I've tried again with another system and can not acces to XU4 using SSH0_1545760613728_Capture du 2018-12-25 18-51-30.png
    I did not get the box to update key

    Board : RPI3B (192.168.4.106)
    Image : 2018-07-13
    It's work
    I confirm key was updated

    0_1545760958260_Capture du 2018-12-25 19-02-01.png



  • Pas d'update c'est bien pour ceux qui non encore rien installer sur leurs PI3B+ mais pour les autres il faut attendre une mise a jour ou c'est mort??


  • Staff
    Moderator
    Team

    @marco-polo vu la complexité de cette mise à jour, il est difficilement concevable d'envisager une mise à jour standard justement. Prévois un backup de tes roms ;)



  • @paradadf Bump 507 RPI3 (2018/11/12) beta was the best release for me! Running like a stable release with everything working. All my games from 20 Systems, PS4-Bluetooth-Controller, 5GHz-Wifi,1500Mhz-overclocking, overall stability on my RPi3B+...everything just running perfectly. Nice to have it. Thanks for good work!
    Where can I find my UI-settings, overall gameplay- and emulatorsettings, audio etc. stored to copy&paste them later into the future final release (foldername?/filename?)? Not all my menu-settings are stored in the recalbox.conf(?). (My games are stored on external USB-drive.)
    Thanks for reply. 🤓



  • @oyyodams Je vais prévoir cela, en tout cas super taf de la team Recalbox et beau cadeau de noël pour les Retro Gamers que nous sommes ^^
    Juste les roms pour le backup pas autre choses avant de me lancer?



  • Bonjour je joue avec une manette PS4 dans les menus celle ci ne fonctionne dans aucun jeu



  • J'utilise un raspberry pi 3 b+



  • Ça y est j'ai sauter le pas :p par contre il m'est impossible d’associer ma 8bitdo NES30 Pro, il la trouve bien mais "impossible d'associer la manette" :/ et les touche A et B sont inverser sur ma manette filaire Xbox !



Want to support us ?

317
Online

77330
Users

19403
Topics

143880
Posts

Looks like your connection to Recalbox Forum was lost, please wait while we try to reconnect.