Raspberry Pi 4

For information, Recalbox IS NOT compatible with Raspberry Pi 4 yet.
Pour information, Recalbox N'EST PAS encore compatible avec le Raspberry Pi 4.

The Recalbox Team.

Testers wanted: major system upgrade (Pi3b+, KODI 17 and much more ...)



  • @simba51 Thanx !



  • détail : recalbox manager affiche une mémoire à 495MB.
    J'imagine qu'il faut juste actualiser cela.



  • I've measured internal bluetooth input lag with an Xbox one S gamedpad on both Rpi 3 and 3+*.

    I did not notice any difference.
    With 100 ping, mean is around 16ms with a min of 14min and a max of 27 in both case.

    On the other hand I noticed a difference when I change the driver.
    By moving from xpad to xpadneo, input lag goes from a mean of 16ms to a mean of 22ms (min of 19ms and max of 48ms, from 100 ping).

    So I guess the difference observed by choum is due to software and not hardware. Have you tried this on a fresh install ?

    *The tests were carried out with l2ping command on a blank installation of raspbian lite (last version: 2018-11-13), after a sudo apt-get update upgrade.



  • @vincent-84 said in Testers wanted: major system upgrade (Pi3b+, KODI 17 and much more ...):

    détail : recalbox manager affiche une mémoire à 495MB.
    J'imagine qu'il faut juste actualiser cela.

    Sorry, wrong language :
    I said : recalbox manager shows a memory at 495MB.
    Seems to be just a small mistake



  • @oyyodams Hello la team et merci pour votre travail !
    Je viens de flasher une carte fraiche sur ce nouveau build de beta 2018/11/12 pour tester le wifi. Problème toujours présent pour moi : une fois que je l'active, je sélectionne mon SSID et je tape mon MDP mais impossible de se connecter.
    J'ai aussi essayé en mettant directement les infos dans le recalbox.conf mais j'ai le même résultat. Du coup, je suis revenu en cable.


  • Staff
    Team
    Moderator
    Translator

    @vincent-84 no mistake. The rest ist reserved for the GPU.



  • Hello,
    Tested on PI3b+ with 8Bit Do FC30 controllers.
    Wifi doesn't work.
    Remapping FC30 failed.
    text alternatif



  • ShareDevice=NETWORK on 3b+ doesnt work.



  • @toniosj said in Testers wanted: major system upgrade (Pi3b+, KODI 17 and much more ...):

    ShareDevice=NETWORK on 3b+ doesnt work.

    same here... I posted to other threads because I can't get it worked... folders, users and command should be right.

    If this is a bug that would be "good". Because I tried so much to get it worked.



  • @moguai my shared folder works fine with a pi3 stable recalbox. On my Pi3b+ the same shared folder and configuration dont work on beta recalbox.





  • @patsar
    @OyyoDams

    I understand better why, during my tests with the new Rpi 3 A + with the installation of my image recalbox beta of 08/18/18, the update of 12/11/18 was not made. Updates can not be done now?


  • Staff
    Moderator
    Team

    Hi friends,

    First of all, upgrade link is fixed. But that's not all! We've just released a new version of the beta, with some improvements:

    • Many fixes on ES and less memory consumption
    • Better handle of memory between GPU and CPU, so now PSP games should launch really better :)
    • Zipped WHDL support
    • Default resolution fix on mupen

    There are still some work to do:

    • Keyboard bug in ES
    • Auto pad configuration
    • Kodi bump
    • etc.

    We're working on it ;)



  • @oyyodams said in Testers wanted: major system upgrade (Pi3b+, KODI 17 and much more ...):

    Hi friends,

    First of all, upgrade link is fixed. But that's not all! We've just released a new version of the beta, with some improvements:

    • Many fixes on ES and less memory consumption
    • Better handle of memory between GPU and CPU, so now PSP games should launch really better :)
    • Zipped WHDL support
    • Default resolution fix on mupen

    There are still some work to do:

    • Keyboard bug in ES
    • Auto pad configuration
    • Kodi bump
    • etc.

    We're working on it ;)

    Any news about these emultors problems on rpi3 version?

    BLUEMSX - Returns to the menu
    FMSX - Stop on a black screen
    HATARI - Returns to the menu after error message



  • @oyyodams Is the bugfix about displaying folder scraping included ?



  • @oyyodams Thanks a lot to every developers !
    And good for the next one ^^



  • @oyyodams Great!



  • @oyyodams
    Thanks a lot to all the Dev Team ! Hope you are in the good way to deliver final release !!



  • @OyyoDams
    since the last release, ES always crash after the introductive video (black screen with the version of the release).
    I've try with a direct upgrading (from ES) first, and then I reflash my SD card with the same result.

    Any idea about that issue ?



  • Bonjour à tous !
    Petit retour d'expérience sur PC. Je n'ai pas trouvé de lien de téléchargement direct pour la beta pour X86_64. Du coup j'ai téléchargé ici la dernière version stable :
    https://archive.recalbox.com/v1/upgrade/x86_64/recalbox.img.xz?source=install
    Le démarrage se passe bien. Ensuite, j'ai modifié comme suit le recalbox.conf :
    updates.type=https://review-master-slwsz0-archive-review-prod.recalbox.com
    Une mise à jour était alors proposée dans le menu update. Je l'ai lancée. Elle s'est téléchargée mais le problème est qu'au redémarrage, j'aboutis sur un écran noir au lieu d'arriver sur ES. La machine n'est pas visible sur le réseau donc je n'ai pas pu faire d'archive. Du coup j'ai redémarré avec le bouton reset et relancé en mode verbose. Voici ce qui s'affiche :
    alt text
    J'ai fait aussi une archive avant le reboot (sur la version stable donc) :
    https://file.ac/SH0iSHaU5rE/

    Si quelqu'un a une idée... ou un lien de téléchargement direct de la beta X86_64, je suis preneur. Merci d'avance !



Want to support us ?

Join us on :

187
Online

52432
Users

17758
Topics

133633
Posts

Looks like your connection to Recalbox Forum was lost, please wait while we try to reconnect.